Upgraded brakes will they fit
  1. Welcome to Chrysler 200 Forum : Chrysler 200 Forums – General discussion forum for Toyota Trucks

    Welcome to Chrysler 200 Forum : Chrysler 200 Forums - a website dedicated to all things Chrysler 200.

    You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, Join Chrysler 200 Forum : Chrysler 200 Forums today!
     
+ Reply to Thread
Results 1 to 8 of 8

Thread: Upgraded brakes will they fit

  1. #1
    Junior Member
    Join Date
    Aug 2019
    Posts
    1
    Thanks
    0
    Thanked 1 Time in 1 Post

    Default Upgraded brakes will they fit

    Okay so I have read that the 2011-2014 200 shares suspension parts with the Avenger, Journey, short wheel base Dodge Caravan. Has any one tried installing the Dodge Journey heavy duty brake package on the 200? I know the HD brake package has 330mm rotors a 2 piston calipers as I just installed them on my 2010 Journey and they made a world of difference in the stopping distance and eliminated the typical brake fade associated with the Journey and was thinking if they would fit the 200. Anyone try it?

  2. The Following User Says Thank You to 14chrysler200 For This Useful Post:

    Black Knight (08-06-2019)

  3. Remove Advertisements
    Chrysler 200 Forum
    Advertisements
     

  4. #2
    Senior Member
    Join Date
    Jan 2019
    Location
    MA
    Posts
    120
    Thanks
    20
    Thanked 38 Times in 25 Posts

    Default

    330mm rotors came with the 200 with the V-6, I believe. It's one of the choices listed at Rockauto. So they should fit.

  5. #3
    Senior Member Sleeper200c's Avatar
    Join Date
    Oct 2018
    Location
    R.I.
    Posts
    262
    Thanks
    132
    Thanked 55 Times in 39 Posts

    Default

    Too bad theres not any 2 piston caliper options for the gen2 200.
    2015 200c 3.6 fwd

    Magnaflow cat-back exhaust
    K&N C.A.I.
    RPM torque tube
    RPM base stage 93 octane tune
    225/50r17 Hankooks noble s2
    Amsoil 5w20
    Amsoil P.I. before oil changes
    EBC Red stuff brake pads
    Powerstop drilled and slotted rotors
    Amsoil synthetic brake fluid
    Amsoil dominator coolant boost
    Stant 18 psi coolant cap
    Tree air freshners under seats

  6. Remove Advertisements
    Chrysler 200 Forum
    Advertisements
     

  7. #4
    Senior Member BJoe's Avatar
    Join Date
    Apr 2012
    Location
    Chicagoland
    Posts
    1,736
    Thanks
    48
    Thanked 107 Times in 93 Posts

    Default

    The key to this swap will be the caliper bracket for the front calipers, I was able to get my hands on a pair of Euro only BR2 caliper brackets that are made to put the 2 piston calipers on the 2008-2014 Avenger/Sebring/200 and space it out enough to clear the 13.4"/330mm rotors that were also used on the SRT4 Caliber. I've also bought the calipers, hoses, and hardware (using the vin for my Sister's 2014 Challenger R/T Classic) and bought R1 Concepts 330mm front rotors and semi-metallic pads for all corners. Just haven't been able to install them yet.

  8. The Following 2 Users Say Thank You to BJoe For This Useful Post:

    Black Knight (08-10-2019), Gooch (Today)

  9. #5
    Junior Member
    Join Date
    Apr 2019
    Posts
    1
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Default Upgraded brakes will they fit

    Its will fit and fix your issue! May be you can replace with genuine brakes or can recycle it.
    Last edited by saramoore673; 08-10-2019 at 09:03 AM. Reason: Linnk

  10. #6
    Member ModdedAWD's Avatar
    Join Date
    Jan 2019
    Location
    Michigan
    Posts
    44
    Thanks
    2
    Thanked 24 Times in 18 Posts

    Default

    Quote Originally Posted by Sleeper200c View Post
    Too bad theres not any 2 piston caliper options for the gen2 200.
    The Cherokee caliper bracket and dual piston calipers should bolt on, I don't think anybody has done it yet
    2015 200S 3.6 AWD
    Mopar CAI
    Mopar cat back
    05281803aa lower intake
    BBK throttle body
    Unlocked PCM
    Player3 ECM and TCM tune

  11. The Following User Says Thank You to ModdedAWD For This Useful Post:

    Sleeper200c (Today)

  12. #7
    Junior Member MATEOD1's Avatar
    Join Date
    Mar 2018
    Posts
    24
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Default

    68185425AA is the part number used for the dual piston calipers. I've seen lots of sites carry this part now. I just ordered a pair for less the 90 bucks including shipping. The picture online looks like the single piston bracket but I'll verify when I get it physically.

  13. #8
    Senior Member BJoe's Avatar
    Join Date
    Apr 2012
    Location
    Chicagoland
    Posts
    1,736
    Thanks
    48
    Thanked 107 Times in 93 Posts

    Default

    Might check to see if he still has them, Polygon had a post where he's selling the correct brackets.

    https://www.200forums.com/forum/20-c...-brackets.html

+ Reply to Thread

Quick Reply Quick Reply

Register Now

List your make, model & engine spec

Please select your insurance company (Optional)

Posting Permissions

  • You may post new threads
  • You may post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBadvanced CMPS v4.3.0