How to remove from bumper cover??
  1. Welcome to Chrysler 200 Forum : Chrysler 200 Forums – General discussion forum for Toyota Trucks

    Welcome to Chrysler 200 Forum : Chrysler 200 Forums - a website dedicated to all things Chrysler 200.

    You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, Join Chrysler 200 Forum : Chrysler 200 Forums today!
     
+ Reply to Thread
Results 1 to 8 of 8

Thread: How to remove from bumper cover??

  1. #1
    Junior Member
    Join Date
    May 2016
    Posts
    15
    Thanks
    0
    Thanked 4 Times in 3 Posts

    Unhappy How to remove from bumper cover??

    Hello

    I tried to remove the front bumper cover to get LED foglamp installed. Mine is 200c Limited so Iam doing this from scratch.
    Has any one got some idea how to remove it safely??

    Also, I bought the LED foglamp from Ebay but when install and connected all the wires, they wouldn't work!!!! I am doing all the job as external foglamp fitting with external switch.
    Has any one know why?? Need help

    thanks

  2. Remove Advertisements
    Chrysler 200 Forum
    Advertisements
     

  3. #2
    Member Screemz2BDrivn's Avatar
    Join Date
    Apr 2016
    Posts
    35
    Thanks
    9
    Thanked 2 Times in 2 Posts

    Default

    Quote Originally Posted by lma200c View Post
    Hello

    I tried to remove the front bumper cover to get LED foglamp installed. Mine is 200c Limited so Iam doing this from scratch.
    Has any one got some idea how to remove it safely??

    Also, I bought the LED foglamp from Ebay but when install and connected all the wires, they wouldn't work!!!! I am doing all the job as external foglamp fitting with external switch.
    Has any one know why?? Need help

    thanks
    I'm sorry. I only replaced stock bulbs with LED bulbs... Not entire lamp. The bulbs enter through the bottom of wheel well. You may want to consider entering from there instead of taking off bumper cover. Just a suggestion unfortunately.

    Sent from my Samsung Galaxy Note 4 using Tapatalk

  4. #3
    Member Nicades92's Avatar
    Join Date
    May 2016
    Location
    Bakersfield, CA
    Posts
    81
    Thanks
    36
    Thanked 9 Times in 8 Posts

    Default

    Quote Originally Posted by Screemz2BDrivn View Post
    You may want to consider entering from there instead of taking off bumper cover. Just a suggestion unfortunately.
    Yeah, the only way to access it is from the inner fender well. Removing the tire isn't required, but it makes the job much easier.
    One Man's Trash is Another Man's Treasure.

  5. Remove Advertisements
    Chrysler 200 Forum
    Advertisements
     

  6. #4
    Junior Member
    Join Date
    May 2016
    Posts
    15
    Thanks
    0
    Thanked 4 Times in 3 Posts

    Default

    Finally was able to find the way to remove front bumper.... here it is:

    1- Disconnect and isolate the negative battery cable first for security.

    2- Remove the bolts and the engine belly pan under neath the vehicle from front.

    3- Remove the bolts and the lower front fascia closeout.

    4- Remove the three bolts from the front of the wheelhouse splash shield.

    5- Accessing from the wheelhouse, remove the bolt

  7. #5
    Junior Member
    Join Date
    May 2016
    Posts
    15
    Thanks
    0
    Thanked 4 Times in 3 Posts

    Default

    6- Remove the push fasteners inside engine compartment at front and the remove upper front fascia closeout.

    7- Remove the bolts along the top of the front fascia.

    8- Remove the 6 bolts along the top of the front fascia.

    9- Reach behind the front fascia and pry down at the rear of the retaining bracket (3) by hand, and pull out on the front fascia (1) to release it from the fende

    10- Carefully pull the front fascia out and release if from the retaining bracket under the headlight (2)
    11- Repeat steps 8 and 9 on the opposite side of the front fascia.

    12- Carefully pull the front fascia slightly forward and disconnect the wire harness connector and remove.

    Thats it.

  8. The Following 2 Users Say Thank You to lma200c For This Useful Post:

    Black Knight (03-17-2019), Pennhaven (09-08-2016)

  9. #6
    Junior Member
    Join Date
    Sep 2016
    Posts
    1
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Default

    I need to remove the front bumper cover of my 2015 Chrysler 200 also. Do you know where I can find an instructional video on this? And if not, would you mine sending me one? [email protected]

  10. #7
    Super Moderator Black Knight's Avatar
    Join Date
    Jul 2013
    Location
    Denver, CO USA
    Posts
    2,249
    Thanks
    986
    Thanked 326 Times in 264 Posts

    Default

    Quote Originally Posted by lma200c View Post
    disconnect the wire harness connector and remove.

    Thats it.
    Anyone else have any trouble with this? It sounds simple but I don't want to break it.
    "Black Knight" was my father's trucker CB handle.

    2015 Chrysler 200 S AWD
    Factory tuned, RPM Torque Tube

    2013 Chrysler 200 Limited V6
    Lease returned 1/28/17




  11. #8
    Senior Member mike w's Avatar
    Join Date
    Jun 2015
    Location
    Massachusetts
    Posts
    156
    Thanks
    23
    Thanked 20 Times in 18 Posts

    Default

    https://www.youtube.com/watch?v=VmYbDNNvSbc
    This will show you the trick of releasing the front bumper.
    Mike
    2015 200c

  12. The Following User Says Thank You to mike w For This Useful Post:

    Pennhaven (04-08-2019)

+ Reply to Thread

Quick Reply Quick Reply

Register Now

List your make, model & engine spec

Please select your insurance company (Optional)

Similar Threads

  1. Console Storage Cover/Lid
    By dotbowels in forum Chrysler 200 General Discussion Forum
    Replies: 3
    Last Post: 06-09-2016, 11:07 PM
  2. Driver side mirror cover
    By dclachn in forum Chrysler 200 General Discussion Forum
    Replies: 5
    Last Post: 06-16-2013, 08:12 AM
  3. Loose bumper cover
    By MasterTech in forum Chrysler 200 Appearance and Body
    Replies: 8
    Last Post: 03-11-2013, 11:21 PM
  4. Front Bumper Cover Crack
    By chiz21 in forum Chrysler 200 Appearance and Body
    Replies: 2
    Last Post: 12-07-2012, 09:21 PM
  5. Plastic Engine Cover
    By BJoe in forum Chrysler 200 Engine and Technical Discussion
    Replies: 6
    Last Post: 05-17-2012, 04:16 PM

Posting Permissions

  • You may post new threads
  • You may post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBadvanced CMPS v4.3.0