2013 3.6 CEL P0520 & no code
  1. Welcome to Chrysler 200 Forum : Chrysler 200 Forums – General discussion forum for Toyota Trucks

    Welcome to Chrysler 200 Forum : Chrysler 200 Forums - a website dedicated to all things Chrysler 200.

    You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, Join Chrysler 200 Forum : Chrysler 200 Forums today!
     
+ Reply to Thread
Results 1 to 3 of 3

Thread: 2013 3.6 CEL P0520 & no code

  1. #1
    Junior Member
    Join Date
    Jul 2019
    Posts
    1
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Default 2013 3.6 CEL P0520 & no code

    Hello, I have a 2013 limited 3.6. 65K miles. 2nd owner, well maintained. A few months back, CEL comes on and key dance shows a P0520 code. Had the car serviced, changed oil, and oil pressure was fine. Since then, CEL comes and goes but never shows a code now. Key dance cycles through and says "done" in the odometer display with no code. Thinking of replacing the oil pressure sensor but due to the labor involved it's costly. I think the part is only around 40 bucks, but have to take the intake off, etc to get at it which pushes the job over $300. My gut tells me since there is no more P0520 code, replacing the pressure sensor should probably be done anyway, but might not clear the recurring CEL. Oh and it only seems to come on when doing a series of short trips.....i.e. running several short errands and turning car on/off seems to produce the CEL, and then a couple longer trips seems to clear it. Appreciate your thoughts.

  2. Remove Advertisements
    Chrysler 200 Forum
    Advertisements
     

  3. #2
    Senior Member
    Join Date
    Aug 2013
    Posts
    489
    Thanks
    1
    Thanked 80 Times in 74 Posts

    Default

    Apparently a common problem according the Chrysler tech who has a youtube channel. Here is a vid I found about a shortcut method to replace this sensor in a minivan with a transversely mounted Pentastar. I don't know specifically whether the same shortcut will work on the first gen 200 but it might. You might want to check out some other videos by the same guy - he has a bunch and they're well done.

    https://www.youtube.com/watch?v=5H0S...A&index=4&t=0s

  4. #3
    Junior Member
    Join Date
    Mar 2016
    Posts
    1
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Default

    Had the exact same thing happen on my 2013 Limited with 66k on it. Code came up 2 days after oil change at Chrysler dealership. Most annoying thing was I couldn’t remote start car and cool it off before getting in. $323 at dealership after I negotiated it down from $375. Took less than an hour.

+ Reply to Thread

Quick Reply Quick Reply

Register Now

List your make, model & engine spec

Please select your insurance company (Optional)

Posting Permissions

  • You may post new threads
  • You may post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBadvanced CMPS v4.3.0