Chrysler 200 Forum banner

1 - 4 of 4 Posts

·
Registered
Joined
·
39 Posts
Discussion Starter #1
Installed a set of 9012 LED headlights in the car without modification and they work great but you need to order the resistor kits and tuck it under the bulb... but atleast it all fits behind the dust cover fine!

If you dont do the resistor kits, the light test blinks them on and off cause they think the bulb is blown being low current draw, no fault codes came up for me.

Usually you have to remove the passenger fender wheelwell, but I am flexible enough I changed them both through the engine compartment.

It is the superbrightleds for the LED Lights and ordered a decent $15 resistor kit from eBay.

LED Headlight Kit - 9012 LED Fanless Headlight Conversion Kit with Compact Heat Sink

Part Number: 9012-HLV4 $60/pair

 

·
Registered
Joined
·
279 Posts
The OEM bulb is supposed to be HIR2, and all references online indicate that 9012 is a direct equivalent. Is that not true?
 

·
Registered
Joined
·
1 Posts
What was the resistor kit part number you bought this is becoming a hassle as I bought the anti flicker kit and it did sweet eff all
 
1 - 4 of 4 Posts
Top