Chrysler 200 Forum banner
101 - 106 of 106 Posts

·
Registered
Joined
·
62 Posts
Discussion Starter · #102 ·
List of shopping😆

8 Exhaust valves. Code R6812/RNT
1 gasket kit with head gasket code 02-10029-01
Head preparation
1 Head cap
1 Kit head studs 14-10883-02
1 oil gasket timing side
1 Belt pulley 531076010
2 Lt Radiator cooling liquid red.
1 Lt motor oil
Oil for steering pump
1 Exhaust gasket
1 bottom engine suspension
2 front lower arm suspension
Labor

Total cost 1350 $

Now back to the road😀
 

·
Administrator
2016 Chrysler 200 S, 1998 Sebring JX
Joined
·
2,865 Posts
It is an LED. They usually have a long life & are soldered in place. The solder joint may have broken & needs to be reflowed? The dealerships are pretty useless for any LED repair, they would offer to replace the whole lower switch bank.
Font Art Handwriting Magenta Logo

You may be able to fix this if you disassemble the switch bank down to the circuit board & have a small soldering iron to touch-up the solder joints.
 

·
Registered
Joined
·
62 Posts
Discussion Starter · #106 ·
It is an LED. They usually have a long life & are soldered in place. The solder joint may have broken & needs to be reflowed? The dealerships are pretty useless for any LED repair, they would offer to replace the whole lower switch bank.
View attachment 61155
You may be able to fix this if you disassemble the switch bank down to the circuit board & have a small soldering iron to touch-up the solder joints.
Nothing is easy in this car 😆😆😆😆
Thanks for the advice🙂
 
101 - 106 of 106 Posts
Top