Chrysler 200 Forum banner
1 - 1 of 1 Posts

· Registered
2016 Chrysler 200s 2.4L
Joined
·
169 Posts
I know that you will also need some "E" torx sockets...I found that out when I replaced the engine cradle and had to remove a bunch of them (My 2016 200s had a smashed front end that the damage intrusion was on the passenger side damaging the lower frame rail the aluminum crash bars and then the mounting for those bars) I found a good set of these sockets (3/8") at "Lowes" in their automotive section for around $37 and they handled the abuse with no damage... I now KNOW how the front end of the 2016 200s goes together :)
So far the car hasn't caused me too much grief...
Dave
 
1 - 1 of 1 Posts
Top