Chrysler 200 Forum banner

1 - 5 of 5 Posts

·
Registered
Joined
·
3 Posts
Discussion Starter · #1 ·
I have a 2015 Chrysler 200 Limited with the 2.4L L4. I ordered new brake rotors off Amazon and received 330mm but I currently have 305mm on the car.

Will 330mm work still or do I have to downsize?
 

·
Super Moderator
2016 Chrysler 200 S, 1998 Sebring JX
Joined
·
977 Posts
Welcome to the forums. The front pads are the same, but the knuckles and calipers are different.
You want the 305's.
 
  • Like
Reactions: savagedalt

·
Registered
Joined
·
3 Posts
Discussion Starter · #3 ·
Welcome to the forums. The front pads are the same, but the knuckles and calipers are different.
You want the 305's.
I would just have to replace the knuckles and calipers to make it compatible with the 330 then? Or is it more extensive than that?
 

·
Super Moderator
2016 Chrysler 200 S, 1998 Sebring JX
Joined
·
977 Posts
It may be more than that. The larger front rotors are for the 6-cyl. The rears are the same on all.
Unless someone chimes in who has done a brake conversion before, I would be careful about this.
 

Attachments

·
Registered
Joined
·
3 Posts
Discussion Starter · #5 ·
It may be more than that. The larger front rotors are for the 6-cyl. The rears are the same on all.
Unless someone chimes in who has done a brake conversion before, I would be careful about this.
Got it, I’ll just order the 305mm. Thank you for your advice and insight!
 
1 - 5 of 5 Posts
Top