Chrysler 200 Forum banner

1 - 4 of 4 Posts

·
Registered
Joined
·
9 Posts
Discussion Starter #1
If I placed the heater in (inside air) there was no noise but became very loud in all other settings. What I found is if you remove the cabin filter from the blower you can see inside the heater. look at the large white flipper a move it with a large large screw driver spray w-40 on both ends of the white flpper turn on the heater so the flipper moves apply a little more wd and your problem should be sloved
 
1 - 4 of 4 Posts
Top