Chrysler 200 Forum banner

1 - 6 of 6 Posts

·
Registered
Joined
·
7 Posts
Discussion Starter #1
Hi,need help with active shutter connection. I have lost connection in the accident on my 2015 200,and don't know ho to connect new active shuttle,how cable colors should be. Maybe someone can help with a picture where I can see the cable positions,or maybe someone just know. I can't get the other connection and want to connect four cables separately.Thank you for the help.
 

·
Registered
Joined
·
254 Posts
Hi,need help with active shutter connection. I have lost connection in the accident on my 2015 200,and don't know ho to connect new active shuttle,how cable colors should be. Maybe someone can help with a picture where I can see the cable positions,or maybe someone just know. I can't get the other connection and want to connect four cables separately.Thank you for the help.
Give me the car specs, 2.4, 3.6, s, c?

I believe you can buy the connector if needed.
 

·
Registered
Joined
·
254 Posts
[H=2]ACTUATOR-GRILL SHUTTER[/h][H=3]Full Repair Kit: 68335268AA[/H][H=3]End View[/H]
[H=3]Isometric View[/H]

[H=3]Pin Information[/H]

CavCircuitGaugeColorFunction
1Z9050.50BKGROUND
2D5110.50WH/BGLIN BUS
2D5110.50WT/TNLIN BUS
3A9400.50RDFUSED B(+)
4N00NANO CONNECT

[H=3]Removal Tools[/H]A specific removal tool has not been identified.

[H=3]Terminal Repair Kits[/H]No terminal repair kits have been identified.
 

·
Registered
Joined
·
7 Posts
Discussion Starter #4
Thank you very much,it is 2.4. I think it is a bit expensive $100+ shipping for just one connector. I have tried to find a used one connector,but no luck.
 
1 - 6 of 6 Posts
Top