Chrysler 200 Forum banner

1 - 7 of 7 Posts

·
Registered
Joined
·
44 Posts
Discussion Starter #1
Hello, I was wondering how to remove the rear bumper, i need to replace my rear valance (the grey piece) and i think the only way is by removing the bumper. Does anyone know of a way or should i not attempt it? Im fairly handy but not sure what im getting into
 

·
Super Moderator
Joined
·
1,920 Posts
You posted in the 2015-2016 section, but your profile is blank and we don't know for sure what year or model 200 you have since you didn't mention that.
Have you looked at any youtube video's ? Many times info can be found there in regards to repairs for any vehicle.
 

·
Registered
Joined
·
44 Posts
Discussion Starter #3
I have a 2016 Limited. I did look on YouTube but couldnt find anything regarding rear bumper removal. I did see on here the front bumper removal help but im thinking the rear is somewhat different. I will fill out my profile i didn't know i had left it blank
 

·
Registered
Joined
·
106 Posts
Thanks for posting what you found and the procedure for replacing it... I'm sure your thoughtfulness WILL help others in the future...
Dave
 

·
Registered
Joined
·
5 Posts
Hi, I know this thread is almost a year old. But, I tried to remove the rear valance with all 5 bolts removed. It seems sturdy so I'm not sure if it can just be pulled off. Did you have to pull hard? I'm struggling with the upper part of the rear valance.
Thanks!
 

·
Registered
Joined
·
87 Posts
Hi, I know this thread is almost a year old. But, I tried to remove the rear valance with all 5 bolts removed. It seems sturdy so I'm not sure if it can just be pulled off. Did you have to pull hard? I'm struggling with the upper part of the rear valance.
Thanks!
It's scary the first time you do it but you need to pull hard to release the clips. Give it a good tug and it will come off
 
1 - 7 of 7 Posts
Top