Chrysler 200 Forum banner
1 - 6 of 6 Posts

·
Registered
Joined
·
3 Posts
Discussion Starter · #1 · (Edited)
Goood afternoon all,

This is my first post here, can't seem to google my way out of this one. I am not knowledgeable on parts or anything so hoping someone can help me out.

I had to replace one of my rims and my two front tires. I took it to a wheel shop to get them mounted. The tech said that he didn't have a valve stem for my TPMS because theres a screw on the sensor for the stem to go into. He made it clear that I need the kind of stem that screws into the TPMS, its a Schrader 433 MHz EZ Sensor. I cannot find ANYTHING matching that description, they all seem to be a clamp/roll pin stile valve stem. If this is the case, is there some sort of kit that it requires to work this way?

What am I missing here? Need to figure out what to get to get my sensor working again. :(

Thank you all!
 

·
Administrator
2016 Chrysler 200 S, 1998 Sebring JX
Joined
·
2,077 Posts
Welcome to the forum. This is a 2011-2014 Chrysler 200?
I am not sure what the aftermarket offers, but you want an equivalent of Mopar #68078861AC.
Mopar sells only the complete sensor assembly. The aftermarket sells the stems separately from the sensor.

Font Parallel Screenshot Rectangle Number


Font Technology Brand Liquid Automotive tire


Camera accessory Cameras & optics Font Camera lens Lens
 

·
Administrator
2016 Chrysler 200 S, 1998 Sebring JX
Joined
·
2,077 Posts
The '15-'17 UF is a different style and the pieces can be serviced separately.

Font Document Number Rectangle


White Rectangle Font Line Parallel

Product Font Line Screenshot Rectangle
 

·
Administrator
2016 Chrysler 200 S, 1998 Sebring JX
Joined
·
2,077 Posts
The assembly for the UF is Mopar #68193586AC.
 
1 - 6 of 6 Posts
Top