Chrysler 200 Forum banner

1 - 5 of 5 Posts

·
Registered
Joined
·
4 Posts
Discussion Starter · #1 ·
Hello I have a 2014 Chrysler 200 with the 2.4L. I am replacing the front passenger splash shield and I came across a hole where this bolt is suppose to screw in but I don't know what size it is or where to go to get one. Can someone help me figure out what size it is and where can I get one? Thabks.
57450
 

·
Super Moderator
2016 Chrysler 200 S, 1998 Sebring JX
Joined
·
1,069 Posts
Welcome to the forum. Can't see it, but suspect that it is a Mopar 6101455.
10mm socket should fit. It is a M6x1x20.
mopar 6101455
 

·
Registered
2015 Chrysler 200 Limited
Joined
·
3 Posts
Having been removed this bolt numerous times, I can confirm it being a 10mm.
The smaller black bolts around the wheel well are 7mm
 

·
Super Moderator
2016 Chrysler 200 S, 1998 Sebring JX
Joined
·
1,069 Posts
A link for the 10mm head bolt (item # 7) is in post # 2.
I see 2 of the 7mm head screws (item #3 ) used per shield. They are Mopar # 6510149AA.
It looks like there are 3 plastic push pin retainers (item # 4). Mopar # 6503598. See attached.
You can search online for the specific sizes and sources.
You may find generic equivalents at a hardware store or automotive body shop supplier.
 

Attachments

1 - 5 of 5 Posts
Top