Chrysler 200 Forum banner
1 - 2 of 2 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter · #1 ·
2012 200S Convertible: After I had the mechanic replace all four struts/shocks/springs and rear control arms the rear is sitting about an inch and a half lower. It looks bad and feels bad when I drive. Any idea what they did to cause this? Is there an adjustable part or a way to adjust the height of the rear? Here's a before and after picture..
Wheel Car Land vehicle Tire Vehicle
Wheel Tire Car Vehicle Hood

Wheel Tire Car Vehicle Automotive tire
 

·
Registered
Joined
·
2 Posts
Discussion Starter · #5 ·
Welcome to the forum. Struts won't change ride height, springs will.
OEM parts are an important consideration. Each spring is assigned a sales code.
Although 'good', the aftermarket springs may try to cover too many bases and are not particularly tailored to your car.
The options list can be pulled up by VIN.
While they may no longer be in production, you may want to find a NOS rear pair, if possible.
What is your VIN?

An example using my own car's option list. The rear spring sales codes are ZSU* & ZDU*.
I look up the part #'s (these are from the 2012 Mopar catalog listing. 27 is the convertible, 41 is the sedan). In this case the left & right rear springs are the same part number :

View attachment 59747

View attachment 59748

View attachment 59749


I can look up the part number on Google and in this case, I found my Mopar OEM replacements on an ebay search:
View attachment 59750

Now these are 'new' factory springs. They may have been boxed. They may have sat on a shelf for 10 years.
They haven't been under load. They should be like 'brand new' still.

Thank you for the quick reply!
I entered my VIN into the Mopar.com site and got the following after clicking "rear suspension." https://store.mopar.com/v-2012-chry...x/rear-suspension--rear-suspension-and-cradle
The last 8 of my VIN is CN279716 (is that enough or do you need the whole VIN?).
Thanks! Btw, the dealer says the OEM strut assembly isn't available, so they have to build it using aftermarket parts from AdvanceAuto.
 
1 - 2 of 2 Posts
Top